FREE SHIPPING NZ WIDE    07 847 7675

6.6mm Rob Allen Spears

6.6mm Rob Allen Spears
larger imageMove mouse over the image to magnify
NZ $75.00
incl GST
PLEASE NOTE: Rob Allen products can only be sold within New Zealand

Rob Allen spears are made in the Dive Factory in Durban.  They start life as bulk coil of ultra tough, oil quenched carbon alloy spring steel that has been heat tempered to an incredible 2100mpa.  Each spear is mechanically decoiled and cut from the roll before being hand checked and straightened before machining.

From here the points are tri-cut for maximum penetration, drilled and have their notches cut.  The notches and holes are polished to perfection to prevent wear or chafing on either your shooting line or wishbones.

The spears are sent away for quatro phase coating which offers 4-5 times better corrosion resistance than regular treatments.

The floppers are fitted and hand tuned to flop the first 40 degrees easily and then jam open for maximum security.  The flopper is held on by a stainless spring steel pin for maximum flopper retention.

Each spear is hand checked before it leaves the factory.

6.6mm shafts have 2 notches and can be used with 1 or 2 rubbers.

It is normal to run a 40cm overhang ie if you have a 100cm gun you need a 140cm spear.

You might also be interested in ...

Speargun Refurb Package
NZ $99.00
incl GST
7mm Rob Allen Spears
NZ $75.00
incl GST
7.5mm Rob Allen Spears
NZ $86.25
incl GST
Opening Hours
Monday: 8:30 - 5:00
Tuesday: 8:30 - 5:00
Wednesday: 8:30 - 5:00
Thursday: 8:30 - 5:00
Friday: 8:30 - 5:00
Saturday:  9:00 - 3:00
Contact Us
51 King Street
New Zealand