01435

6.6mm Rob Allen Spears

6.6mm Rob Allen Spears
larger imageMove mouse over the image to magnify
THE UNDISPUTED CHAMPION OF SPEARS
NZ $75.00
incl GST
Qty.
Rob Allen spears are made in the Dive Factory in Durban.  They start life as bulk coil of ultra tough, oil quenched carbon alloy spring steel that has been heat tempered to an incredible 2100mpa.  Each spear is mechanically decoiled and cut from the roll before being hand checked and straightened before machining.

From here the points are tri-cut for maximum penetration, drilled and have their notches cut.  The notches and holes are polished to perfection to prevent wear or chafing on either your shooting line or wishbones.

The spears are sent away for quatro phase coating which offers 4-5 times better corrosion resistance than regular treatments.

The floppers are fitted and hand tuned to flop the first 40 degrees easily and then jam open for maximum security.  The flopper is held on by a stainless spring steel pin for maximum flopper retention.

Each spear is hand checked before it leaves the factory.

6.6mm shafts are ideal for single 16mm rubbered guns up to 120.

It is normal to run a 40cm overhang ie if you have a 100cm gun you need a 140cm spear.

You might also be interested in ...

7mm Rob Allen Spears
NZ $75.00
incl GST
7.5mm Rob Allen Spears
NZ $75.00
incl GST
Stainless Flopper
NZ $5.75
incl GST
   
Opening Hours
Monday: 8:30 - 5:00
Tuesday: 8:30 - 5:00
Wednesday: 8:30 - 5:00
Thursday: 8:30 - 5:00
Friday: 8:30 - 5:00
Saturday:  9:00 - 3:00
 
Contact Us
51 King Street
Hamilton
New Zealand
VIEW MAP