01428

Rob Allen Sparid

Rob Allen Sparid
larger imageMove mouse over the image to magnify
The Original railgun in shorter lengths
NZ $325.00
incl GST
Qty.
The Rob Allen Railgun is the original South African railgun and is the benchmark that all others fall short against.  The Sparid range are the shorter guns with 16mm rubbers and a 6.5mm spear.  They're perfect for chasing small reef fish

Handle:
The Sparid handle is equiped with the latest Vecta handle and mechanism.  The entire handle and mechanism cassette is made of glass reinforced polyamide giving it unequaled strength.  The join where the handle meets the barrel is critical as any weakness here can be a safety issue and any movement will drastically affect accuracy.  The Rob Allen handle consists of a webbed internal spigot that is further reinforced by external shrouds totally eliminating any flex at this critical junction.
The handle has an integrated reel bracket so the Rob Allen Vecta reel can be mounted without needing any screws and is shaped to prevent any chance of the shooting line catching when a reel is not fitted.
The Vecta grip is moulded of rubber and is held in place by two cheek plates to prevent twisting.  There is an extra strong through bolt fitted at the base of the handle for extra strength where the floatline will be attached and the Vecta handle comes with a swivel and shark clip already attached.
The Vecta mechanism features a mechanical line release.  The sear is laser cut out of solid stainless steel and all pivot pins are made of stainless steel for strength under high loads.

Barrel:
The Sparid features an aircraft grade aluminium barrel with a full length extruded rail.  Because the rail is actually extruded it adds huge stiffness and strength helping to make Rob Allen guns the most accurate in the world.

Muzzle:
Our guns are fitted with the new Rob Allen Low-Profile Vecta muzzle.  The low-profile of this latest muzzle makes for extremely low drag through the water and the very clear sight pattern along the spear usually reserved for open-muzzle designs.  The muzzle accommodates two rubbers that are clipped into place preventing 'muzzle flip' when fired.  The shape of the muzzle guides the rubber in a straight line, parallel with the barrel and spear.
Like the handle the Vecta muzzle is constructed of bomb proof glass reinforced polyamide and the critical muzzle-barrel interface consists of an extra long internal spigot with external shrouds.
The muzzle hole attachment point has been shaped to accept an optional stainless steel shackle recommended when a reel has been fitted.

Set-up:
Rob Allen spears are a triumph of engineering.  They are constructed of extremely high tensile spring steel that has been tempered to an incredible 2100mpa.  They are fitted with an over-sized stainless steel flopper on the bottom of the spear that has been perfectly hand-tuned to flop easily the first 40 degrees and then jam open.  The flopper is held on by a stainless spring steel pin for maximum flopper retention. The shooting line hole and notches have been precision cut and perfectly finished to never damage either your shooting line or wishbones.
The Sparid comes with a 6.6mm single notched shaft with a 40cm overhang (the difference between length of barrel and length of shaft).
The spear is attached to the muzzle via a single wrap of 1.8mm monofilament and a 10cm gun bungee.
The Sparid comes fitted with a single 16mm rubber with a dyneema wishbone.

Read more about what makes Rob Allen spearguns so special HERE

PLEASE NOTE: Rob Allen Spearguns can only be sold within New Zealand

You might also be interested in ...

Epsealon Stinger 100
NZ $269.00
incl GST
Rob Allen Snapper
NZ $399.00
incl GST
Rob Allen Caranx
NZ $399.00
incl GST
500PSI Silicone grease
NZ $15.00
incl GST
   
Opening Hours
Monday: 8:30 - 5:00
Tuesday: 8:30 - 5:00
Wednesday: 8:30 - 5:00
Thursday: 8:30 - 5:00
Friday: 8:30 - 5:00
Saturday:  9:00 - 3:00
 
Contact Us
51 King Street
Hamilton
New Zealand
VIEW MAP